CALL US (855) 998-8726 APR Performance Carbon Fiber Wind Splitter With Rods (CW-922005)
461.72461.721
APR Performance Carbon Fiber Wind Splitter With Rods (CW-922005)
To combat the effects of front end lift, APR Front Wind Splitters are utilized to give extra traction and control in the front of a car. By creating a high pressure area on top of the wind splitter, high pressure air flow is restricted to flow underneath a car. With low pressure below the car, the effect of lift is reduced and a driver can gain ...
APR PerformanceAPR Performance Carbon Fiber Wind Splitter With Ro

APR Performance

APR Performance Carbon Fiber Wind Splitter With Rods (CW-922005)

Oversized Item

$451.72

Select Your Vehicle
Details
To combat the effects of front end lift, APR Front Wind Splitters are utilized to give extra traction and control in the front of a car. By creating a high pressure area on top of the wind splitter, high pressure air flow is restricted to flow ...
  • Reduce front-end lift
  • Maximize cornering speeds
  • Enhance high-speed stability
  • Carbon Fiber reinforcement all APR Front Wind Splitters are reinforced with sheets of carbon fiber
  • Fully functional undertray APR Front Wind Splitters are not just add on cosmetic pieces.
  • Every APR Front Wind Splitter completely covers the entire area below a cars front bumper. This allows for smoother air flow below the front bumper, creating more efficient downforce
  • Supporting every APR Front Wind Splitters are stainless steel Support Rods
  • The standard carbon fiber type of splitter provides good strength and rigidity, and is suitable for moderate racing conditions
  • APR Performance Front Wind Splitter is shaped to conform to the factory bumper
  • Built to take quality to a new level and deliver peak performance
  • Meticulously engineered with top-of-the-line technology
  • Expertly built from super strong yet lightweight materials
  • Thoroughly tested to withstand extreme conditions
  • For more questions about this product, please Contact Us
Description

To combat the effects of front end lift, APR Front Wind Splitters are utilized to give extra traction and control in the front of a car. By creating a high pressure area on top of the wind splitter, high pressure air flow is restricted to flow underneath a car. With low pressure below the car, the effect of lift is reduced and a driver can gain from the extra traction and control.APR Performance Front Wind Splitters integrate with the front bumper to reduce front-end lift and increase high-speed stability. APR Performance Front Wind Splitters are highly-effective at balancing the front-vs-rear downforce when used on conjunction with APR Performance adjustable wings. All Front Wind Splitters are built to order with a lead time of 2-3 weeks

  • Carbon Fiber Reinforcement
  • All APR Front Wind Splitters are reinforced with sheets of carbon fiber.
  • Fully Functional Undertray
  • Our Front Wind Splitters are not just add on cosmetic pieces. Every APR Front Wind Splitter completely covers the entire area below a cars front bumper. This allows for smoother air flow below the front bumper, creating more efficient downforce.
  • Support Rods Included
  • Supporting every APR Front Wind Splitters are stainless steel Support Rods.
California Proposition 65: This product can expose you to chemicals including Styrene, which is known to the State of California to cause cancer, and Bisphenol A which is known to the State of California to cause birth defects or other reproductive harm.
Application List
ImageSKU / Part NoApplicationDetailStockPriceAdd to Cart
 CW-922005Honda S2000 (2004-2009) - CRIn Stock$451.72BUY
+ -
Specifications
Pattern
2x2 twill weave
Material
Carbon fiber, 3K + fiberglass mat
Coating
UV-stable clear coat
Mounting
Custom mounting required (no pre-drilled holes)
Hardware
Stainless-steel machine screws, washers, nuts, and adjustable rods
Return Policy

At JM Auto Racing we make returns and other client services as easy as possible. Our mission is to provide you with the best products and the best service in the automotive industry. We understand that sometimes, clients change their minds about products that they order or simply do not need them anymore. We also know that clients are cautious about terms and conditions since they are often tricky and misleading. Our goal is to make the return or exchange process trustworthy and as simple as 1-2-3.

Returns & Exchanges
If you are not satisfied with your purchase for any reason, we will be happy to accept a return for a refund or exchange on products in new/unused condition within 30 days of delivery. For orders placed during the holiday season from November 15th to December 31st, the return period is extended to 60 days. The following rules apply:

  • All returns and exchanges must be made via our Return Procedure with a valid & signed RMA form.
  • Returns will have a flat 15% restocking fee.
  • Product(s) must be in new condition and in the original packaging (please do not assemble, install, or modify the product in any way). In the event of fitment, flaw or defect pictures may be necessary to complete your request.
  • Any product that was used or fully/partially installed is non-returnable.
  • In some cases, return of the physical product may not be required. For these products, instructions will be provided on how to process a field destroy or dispose of the original item.
  • The few exceptions for items that cannot be returned include:
    • Items classified as “special order” or “made to order”
    • Custom Wheels & Tires Packages
    • Electronics
    • Any non-EPA compliant product including but non limited to catless test pipes, downpipes, headers and high flow cats. We will try to make as many accomadations as possible however a 25% restocking fee will apply. Please contact us to learn more.
  • To start your return please click HERE

Cancellations
We all know that things happen a people change their mind as soon as the purchase things. We take pride in how quickly we get things out the door and with 4 warehouses to ship from plus stock owned at our manufacturers, that speed is always increasing. This is why we only except full cancellations within 30 minutes of placing an in stock order. This helps us ensure your package gets out on the truck immediately or can be flagged before it goes through the packaging process. For orders that are not in stock or special order, we allow 24 hours. Cancellations can be done online by following the instructions found HERE or by emailing [email protected] ,

Your request will be processed as quickly as possible, but please note that sometimes products ship quicker than expected. After 24 hours, or after an out of stock item has been confirmed, fees will apply to all cancellations with the exception of Special Order items, made to order items or custom built items; which can not be cancelled after the 24 hour period. Items confirmed on reserve or pre-ordered are subject to a 10% cancellation fee.

Cancellations are subject to a 10% cancellation fee. This fee is not to rip you off in any way. When you place an order, we lose 3% due to credit card processing, and also another 3% to credit your account. The other 4% is much less then what is needed to cover all other costs and expenses lost by cancelling an order, that was already processed. This fee is will only be imposed on orders that have not shipped. If a special order has been placed, such as pistons, turbo's, etc., and the items are built and ready to ship out, and a cancellation is requested, a 25% cancellation fee will be imposed IF possible to be cancelled.

  • To start your cancel please click HERE

What are my shipping fees?
For orders delivered within the continental US where reason for return isn't a result of a JM Auto Racing error, the cost of the initial shipping charge and a return fee will be deducted from your refund. A prepaid shipping label(s) will be provided.
Freight, international & non-continental US returns are accepted, however coordination of return shipping is the responsibility of the client. In the event an error is made by JM Auto Racing, a return shipping label will be provided.

Сore deposits
Some products sold on JM Auto Racing include a core deposit. These parts have a deposit that is charged upon purchase and fully refunded upon the return of the core. Cores must be in rebuildable condition and matching vehicle application to the product sold. Once the product is received and inspected, the deposit will be refunded to your original form of payment. Note: Product cores returned that are not fully assembled or are not the unit that was removed from the vehicle, will not be refunded and the core will be discarded. Detailed instructions on Core Deposit Returns can be found here.

Defective, damaged, or incorrect products
We all know that accidents happen sometimes. If your product(s) arrive defective, damaged, or simply incorrect, please contact our customer service department as soon as possible. Please do not attempt to use, install, modify, or repair the part! We will send you a replacement part and provide you with a prepaid return label to return the defective part. In some instances, return of the product may not be required. Products must be returned to us within 30 days. If the damage was caused by a shipping courier, we will schedule a damage pick up by the courier. Photos of the damage, defect, or fitment issue may be requested in order to correctly process your request. For items mispackaged or missing, returns and replacements will be handeled as warranty requests, subject to manufacturer involvement and normally handled within 24-48 hours. Please note that products must be in the original packaging and there are additional requirements for products that ship freight.

LTL and Freight Shipments will cover the delivery of most oversized items, including but not limited to, body kits, hoods, trunks, spoilers, doors, roll cages. Items should be thoroughly inspected at time of delivery. Any damage NEEDS to be notated on the Bill of Lading prior to the driver leaving for an insurance to be valid. If damage, is not noted, the insurance is voided out and will need to be dealt with between you and the shipping carrier.

Billing, refunds & credits
Payment for orders placed using PayPal of Affirm will be captured as soon as the order has been successfully placed. Payments for orders placed using a debit or credit card will be authorized only and captured upon shipping. What does this mean? If your order is in stock, it will be charged normally. For out-of-stock items arriving within 30 days, you may see the authorization temporarily fall off. The funds will be placed back into your account and you won't see the pending charge from us. Once the item ships, you will see the funds deducted and the charge posted to your account. For out-of-stock items after 30 days, the above will take place, however we will have to recharge your card once the item is ready to ship.

Refunds for returned products are issued with 3-5 business days once they are received by our warehouse and inspected. Refunds will be issued via the same payment method originally used to place the order (Credit Card, PayPal, Google, Affirm, Check). All returns, where JM Auto Racing is not at fault, will have 15% restocking fee less than cost of freight. Free shipping items will have the initial freight fees deducted from the final refund. Shipping is only free if you keep the item you purchased. Some items will have a higher restocking fee. This information will be revealed to you up front upon requesting a return. Once the refund has been issued a confirmation email will be sent. Please allow an additional 5-7 days for the credit to appear on your account.

Shipping & delivery
To ensure a fast and safe delivery we use FedEx, DHL, Ontrac, USPS, & UPS Ground/Air shipping services. Available shipping methods may vary for different type of products and shipping destinations. Most products in stock ship same day, or within 1 business day after which its delivery can be tracked via tracking number sent to your email. For custom or made to order items shipping time varies as they may have to be manufactured, painted, embroidered, or assembled.

Please keep the following in mind:

  • Products that are oversized must ship truck freight / LTL which differs from ground shipments. NOTE: These oversized items require inspection and a signature upon delivery. For more information on freight shipping click here.
  • Shipments to Canada are treated as all other international shipments. It is the recipient's responsibility to pay all applicable duties, taxes, & brokerage fees. Detailed Info can be found here here.
  • Shipments to HI, AK, PR, Guam, Virgin Islands, APOs, & Canada might require extra shipping charges. International shipping quotes will be e-mailed to the customer before the credit card is charged.
  • Oversized items such as hoods, body kits, bumpers, tonneau covers, roofs, trunks and spoilers may require additional postage that is not displayed on the website. You will be contacted prior to the item shipping to confirm.

To request an international shipping quote before placing an orderIf you would like special shipping arrangements, please contact us via live chat, email or call us at 1.855.998.8726

Disclaimer
In effort to provide our valued clients with the most up to date and accurate information, JM Auto Racing is continuously implementing real-time updates to our online superstore. Due to the immediate nature of these updates the correction of any errors and/or omissions can happen at any time without prior notice. This information may include but is not limited to pricing, availability, suggested use, fitment, compatibility, and warranties.

JM Auto Racing is not responsible for any additional charges, labor, loss, or damage incurred as a result of information, correct or incorrect, referenced or products purchased from JM Auto Racing. While we work to avoid any errors or omissions that may appear on the JM Auto Racing website, we do reserve the right to cancel any undelivered orders based on inaccurate information. more details

Additional Info

Since 1999, APR Performance has been a market leader in producing and manufacturing high quality aerodynamic performance products for the aftermarket automobile industry. Computational Fluid Dynamics (CFD) analysis, combined with real-world track testing, help to ensure products meet stringent performance specifications. Proprietary manufacturing processes utilizing pre-preg. carbon fiber composites help to produce products that are durable, lightweight, and of the highest quality.

JM AUTO RACING carries a wide range of performance auto parts, as well as car accessories and truck accessories. Whether it be body styling such as body kits, hoods, trunks, splitters, spoilers, and carbon fiber items; performance auto parts and car accessories such as turbo kits, superchargers, intakes, exhaust systems, cam gears, clutches and flywheels; suspension accessories such as coilovers, shocks, struts, springs, sway and strut bars, alignment kits and tie bars; or lighting accessories such as projector and euro headlights, HID kits, bumper lights, taillights, brake lights and undercar lighting, JM AUTO RACING has it all. Don't see what you're looking for? No problem. Give us a call or send us an email because chances are JM AUTO RACING has the items in stock.

Warranty

APR Performance Inc. Warranty Form

LIMITED PRODUCT WARRANTY

All products manufactured by APR Performance are fully warranted against defects in workmanship and materials for one (1) year from the time of purchase. If any product is suspected of being defective, the customer may elect to return the product to APR Performance. APR Performance will not accept any C.O.D. returns unless specified by an APR Performance representative. Any item that is determined to be defective will be repaired or replaced. On any warranty claim, APR Performance will be responsible for APR Performance parts only. APR Performance is not responsible for any labor or inconvenience charges incurred by the customer. 

Warranty Policy

  • If a product should fail due to manufacturer’s defect within the stated warranty period, APR Performance will repair or replace the failed product.
  • It is the responsibility of the customer/installer to verify the correct size and application of the parts before installation, and to ensure that proper installation is performed. Problems or failure caused by improper installation are not covered under the APR Performance Limited Warranty.
  • Warranty claims shall be serviced by the applicable seller (APR Performance or Authorized Dealer/Reseller).
  • If an item is returned and exhibits damage not covered by the APR Performance Limited Warranty, a quote will be generated for repair or replacement, plus delivery to the owner. At that time, the owner will have a choice to either pay for the repair or replacement, or request that the item be returned without any action taken by APR Performance. If Warranty requirements are met, the repaired or replaced item will be returned without charge and will continue to be covered for the balance of the original warranty period.
  • All return shipments must be freight prepaid and insured (against loss or damage) with tracking number. No C.O.D. shipments will be accepted. If the warranty claim is fulfilled, the additional shipping expenses incurred will be compensated.
  • APR Performance is not responsible for any labor or inconvenience charges incurred by the customer.
Customer Reviews
Share your thoughts with other customers
Login to leave a review
Questions & Answers
Be first to ask a question